How to adjust image size on Acer Projector?
If the image from your Acer Projector is too small or too large, move the projector closer to or further from the screen. Alternatively, press 'Menu' on the remote control or on the control panel, go to 'Screen' --> 'Aspect Ratio' and try the different settings.
How to fix no image on Acer U5313W?
If no image appears on the screen of your Acer Projector, ensure all cables and power connections are correctly and securely connected. Also, check the pins of the connectors to make sure they are not crooked or broken. Verify that the projection lamp is securely installed and that the 'Blank' feature is not turned on.
What to do if Acer U5313W Projector remote control does not work?
If your Acer Projector's remote control is not working, check that the operating angle of the remote control is within ±30° horizontally and vertically of one of the IR receivers on the projector. Ensure there are no obstructions between the remote and the projector. Also, make sure the batteries are inserted correctly and replace them if exhausted.
What to do if Acer U5313W Projector stops responding?
If your Acer Projector stops responding to all controls, turn off the projector, unplug the power cord, and wait at least 20 seconds before reconnecting the power.
How to adjust focus on Acer U5313W Projector?
If the image from your Acer Projector is out of focus, adjust the 'Focus Ring' on the projector lens. Also, ensure that the projection screen is within the required distance.
Why is there no sound from my Acer U5313W Projector?
If you're not getting any sound from your Acer Projector, and you are playing from an external source, ensure you have an audio cable securely connected between the source device and the projector’s audio input. Also, make sure external speakers are not connected, the volume is not set to minimum, and the 'Volume --> Mute' function is set to 'Off'.
How to correct slanted image on Acer Projector?
If the image on your Acer Projector has slanted sides, reposition the projector so that it is centered on the screen and below the bottom of the screen, if possible. Alternatively, use 'Screen' --> 'V Keystone' from the OSD to make an adjustment.
How to fix partial image on Acer U5313W Projector?
If your Acer Projector displays a partial, scrolling, or incorrectly displayed image, press 'Auto Sync' on the remote control. Also, verify that your display resolution setting is lower than or equal to 1080p. If the projector is still not projecting the whole image, you will also need to change the monitor display you are using.
How to stabilize flickering image on Acer U5313W?
To correct an unstable or flickering image on your Acer Projector, adjust the 'Phase'. You can also try changing the monitor color setting from your computer.
Why is the image stretched on my Acer Projector?
If the image on your Acer Projector is stretched when displaying a 16:9 DVD title, and you play a 4:3 format DVD title, change the format to 4:3 in the projector OSD. If the image is still stretched, set up the display format as 16:9 (wide) aspect ratio type on your DVD player.
To Next Page
General
