Powering On the Projector
Securely connect the power cord and signal cable. When connected, the Power 1.
LED will turn red.
Turn on the lamp by pressing 2. “ ” button on the control panel or on the remote
control. The Power LED will turn blue.
Turn on your source that you want to display on the screen (computer, note-3.
book, video player, etc). The projector will detect the source automatically and
will display on the screen.
If you connected multiple sources at the same time, press the “Source” button 4.
on the remote control to switch between inputs.
Powering On/Off the Projector
To Next Page
Loading...
