Name
Description
1 Source Select an input signal.
2 ReSync
Automatically synchronize the PC analog timing to its
optimized condition.
3 HDMI Switch to HDMI source.
4 Video Switch to Composite Video or S-Video source.
5 3D Press the “3D” to turn the 3D OSD menu on/off.
6 Menu Launch or Exit the on-screen display(OSD).
Four Directional
Select Keys
Press ▲▼◄► direction buttons to select items or
make adjustments.
8 Freeze
Press to freeze the image. Press it again to un-freeze
the image.
9 Blank
Hide the screen picture. Press again to display screen
picture.
10 Mute
Mute the volume of speakers and audio out. Press
again and switch to normal volume.
11
Power
Power on/off the projector.
12 PC Switch to VGA 1/VGA2 source.
13 Keystone / Adjust image until the sides are vertical.
14 Aspect Use this function to choose your desired aspect ratio.
15 Volume +/- Increase / decrease audio volume.
To Next Page
Loading...
