EasyManua.ls Logo

Acer U5313W - Page 36

Acer U5313W
57 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
... English
3D
3D
Auto: When a HDMI1.4a 3D timing identication signal is detected, the 3D image
`
is selected automatically.
Choose “Off” to disable 3D function.
`
Choose “On” to enable 3D function.
`
3D Invert
If you see a discrete or overlapping image while wearing DLP 3D glasses, you may
need to execute “Invert” to get best match of left/right image sequence to get the
correct image.
3D Format
Use this feature to select the 3D format. Options are: “Frame Packing”, “Side-by-Side
(Half)”, “Top and Bottom”, “Frame Sequential” and “Field Sequential”.
“Frame Sequential” is supported the DLP Link 3D input signals from VGA / HDMI connector.
“Frame Sequential” / “Field Sequential” are supported the HQFS 3D input signals from Composite/S-
video connector connector.
“Frame Packing” / “Side-by-Side(Half)” / “Top and Bottom” are supported from HDMI 1.4a 3D input
signals.
Note
Note
1080p @24
Use this feature to select 96 or 144Hz refresh rate as using 3D glasses in the1080p @
24 frame packing.
3D
3D
3D Invert
3D Format
1080p@24
Off
Off
Select Enter Exit

Related product manuals