Acer U5313W - Page 39

38
English ...
When making a direct connection from your computer to the projector
Step 1: Find an IP Address (192.168.10.100) from LAN function of projector.
Step 2: To open Network Connections,
click
Start
, click
Control Panel
,
click
Network and Internet
Connections
, and then click
Network Connections
. Click the
connection you want to congure,
and then, under
Network Tasks
, click
Change settings of this
connection
.
Step 3: On the
General
tab, under
This
connection uses the following
items
, click
Internet Protocol (TCP/
IP)
, and then click “Properties.”
Step 4: Click
Use the following IP
address
, and type in as below:
IP address: 192.168.10.99
`
Subnet mask: 255.255.255.0
`
Step 5: To open Internet Options,
click IE web browser, click Internet
Options, click the
Connections tab
and click “LAN Settings...”
Step 6: The
Local Area Network (LAN)
Setting
dialog box appears
,
In the
Proxy Server area
, cancel the
Use
a proxy server for your LAN check
box
., then click “OK” button twice.
Step 7: Open your IE and type in the IP
address of 192.168.10.100 in the
URL then press “Enter” key.