25
SOURCE
Source Selection
• Manual: “Source Selection” is not activated.
• Auto: Automatically searches for and switches to the appropriate Input mode, when
the projector turn on, or no input signal is detected.
3D
3D Mode
• Auto: When a 3D identification signal is detected, the format is selected
automatically.
• Off: 3D Mode is not activated.
• Top and Bottom/Frame Sequential/Frame Packing/Side By Side: Select the same
format type of the received 3D signal.
3D L/R Invert
Selecting “Disable” or “Invert” switches between the image for the left eye and the
image for the right eye, so that you can make the settings for more natural viewing.
To Next Page
Loading...
