Chapter 1 3
LAN
• Controller: Intel PCI-E Gbt LAN controller/PHY
• RJ-45 Back panel port with Link/Activity LEDs
USB ports
• Supports 14 USB ports. All USB ports must be boot-capable includes USB-ODD, USB-HDD, USB-FDD,
and etc…
• On-board: 4 2*5 headers ( 8ports)
• 4 ports for front daughter board
• 4 ports reserved
• Connector Pin: standard Intel FPIO pin definition
Extension slot
• Support one PCIe x 16 slot
• Support one PCIe x 1 slots
• Support two PCI slot
Rear I/O connectors
• 1 D-Sub port
• 1 DVI-D port
• At least 6 USB ports
• 1 RJ45 LAN port
• 3 mini audio jacks
• At least five HD audio in/output
• 2 PS2 keyboard/mouse connector
• 1 serial port
On-board connectors
• 1 LGA 1156 CPU socket
• 4 DDR3 DIMM memory sockets
• 1 PCI Express x16 slot
• 1 PCI Express x 1 slot
• 2 PCI slot
• 1 FDD slot
• 6 SATAII connectors
• 4 2*5 pin Intel FPIO specification USB pin connectors (follow Intel FPIO standard Specification)
• 1 2*5 pin Intel FPIO spec. Microphone In/ Headphone Out pin connectors
• 1 4 pin CPU Fan connector
• 1 3 pin System Fan connector with linear circuit
• 1 4 pin SPDIF header closed to PCIEx16 slot
• 1 24 pin ATX interface PS3/PS2 SPS connector.
• 1 2*7 pin front panel IO header
• 1 Jumper for clear CMOS
• 1 on board buzzer
• 1 2pin OBR header