65 Chapter 5
Connecting Case Components
After you have installed the motherboard into a case, you can begin connecting the motherboard components.
Refer to the following:
1. Connect the CPU cooling fan cable to CPU_FAN.
2. Connect the standard power supply connector to ATX1.
3. Connect the case switches and indicator LEDs to the F_PANEL.
4. Connect the system cooling fan connector to SYS_FAN.
5. Connect the auxiliary case power supply connector to ATX_12V.
9 VCC3 10 FWH1
11 FWH0 12 GND
13 NC 14 NC
15 3VSBY 16 SIRQ
17 GND 18 GND
19 LPCPD_L 20 SMBCLK
Pin Signal Name Pin Signal Name
To Next Page
Loading...
