Chapter 5 60
Jumper Setting
The section explains how to set jumper for correct configuration of the mainboard.
Setting Jumper
Use the motherboard jumpers to set system configuration options. Jumpers with more Than one pin are
numbered. When setting the jumpers, ensure that the jumper caps are Placed on the correct pins.
System Board Jumper Setting
Jumper Type Description Setting (default) Picture
CLR_CMOS 3-pin CLEAR CMOS 1-2: NORMAL
2-3: CLEAR
Before clearing the CMOS, make
sure to turn the system off.
ME_DISABLE 3-pin MEDISABLE 1-2: NORMAL
2-3: MEDISABLE
BIOS_WP 3-pin BIOS FLASH
PROTECT
1-2: NORMAL
2-3: BIOS_WP
To Next Page
Loading...
