Acer X111 - Remote Control Operation

5
English
Remote Control Layout
# Function Description
1 POWER Refer to the "Turning the Projector On/Off" section.
2 ASPECT RATIO To choose the desired aspect ratio.
3 ZOOM Zooms the projector display in or out.
4 RESYNC Automatically synchronizes the projector to the input
source.
5 Keystone Adjusts image distortion caused by tilting projection
(±40 degrees).
Four
directional
select keys
Selects items or makes adjustments to your selection.
6 Keypad 0~9 Press "0~9" to input a password in the "Setting" >
"Security" OSD.
7 VGA To change source to VGA. This connection supports
analog RGB, YPbPr (480p/576p/720p/1080i/1080p),
and YCbCr (480i/576i).
8 COMPONENT (No function)
9 S-VIDEO To change source to S-Video.
10 HDMI™;
HDMI™/DVI
To change source to HDMI™ (or DVI) (for the model
with HDMI™ or DVI connector). (For P1340W)
11 Infrared
transmitter
Sends signals to the projector.
12 Empowering key Enables unique Acer functions: eView, eTimer,
ePower Management, e3D.
13 FREEZE To pause the screen image.
PgDn
PgUp
SD/USB A HDMI/ DVI LAN/WiFi USBB
ENTER
BACK
Downloaded From projector-manual.com Acer Manuals