Acer X111 - Image Display Settings; Projection Modes and Location; Aspect Ratio and Keystone Correction; Sharpness, Position, and Frequency

21
English
Image
Projection
(X111/X1140)
• Front-Desktop: The factory default setting.
• Front-Ceiling: When you select this function, the
projector inverts the image for ceiling-mounted
projection.
• Rear-Desktop: When you select this function, the
projector reverses the image so that you can project
behind a translucent screen.
• Rear-Ceiling: When you select this function, the
projector reverses and inverts the image at same time.
You can project from behind a translucent screen with
ceiling mounted projection.
Projection
Mode (X1140A/
X1240/X1340W/
P1340W)
• Front: The factory default setting.
• Rear: Reverses the image so you can project from
behind a translucent screen.
(X1140A/X1240/X1340W)
(P1340W)
(X111/X1140)
Downloaded From projector-manual.com Acer Manuals