How to fix Acer Projector when no image appears on screen?
First, ensure the projector is connected as described in the "Getting Started" section and that none of the connector pins are bent or broken. Then, check if the projector lamp has been securely installed. Also, verify that you have removed the lens cap and the Acer Projector is switched on.
How to adjust the image size on an Acer X1160P?
To adjust the image size on your Acer Projector, try the following: adjust the zoom lever on the front of the projector (for X1160Z/ZC/PZ/PZC, X1260/Z/ZC/P/PZ/PZC/K/KC series), move the projector closer to or further from the screen, or press "MENU" on the remote control, go to "Image --> Aspect Ratio" and try different settings or press "Aspect Ratio" on the remote control to adjust directly.
General| Number of colors | 16.78 million colors |
|---|---|
| Vertical scan range | 50 - 85 Hz |
| Horizontal scan range | 31 - 69 kHz |
| Projection technology | DLP |
| Contrast ratio (typical) | 2500:1 |
| Projector native resolution | SVGA (800x600) |
| Aspect ratio | 4:3 |
| Dimensions (WxDxH) | 267 x 80 x 187 mm |
| Power requirements | 100 - 240 V |
| Connectivity technology | Wired |
| Lamp power | 180 W |
| Light source type | Lamp |
| Service life of light source | 3500 h |
| Service life of light source (economic mode) | 4000 h |
| USB 2.0 ports quantity | 1 |
| Power consumption (standby) | 5 W |
| Power consumption (typical) | 255 W |
Weight and Dimensions| Weight | 2300 g |
|---|
To Next Page
