ACMER P2 - LightBurn Software Guide; Connecting to LightBurn

8.2.1 Connecting the machine
① Click "Devices", and then click "Create Manually".
② Select "GRBL" and click "NEXT".
③ Select "Serial/USB", and then click "NEXT".
8.2 Lightburn Tutorial
01 02
03 04
05 06
07 08
09 10
11 12
13 14
15
16
17 18
19 20
21 22
23 24
25 26
27 28
29 30
31 32
33 34