ACMER P2 - Securing Profiles with M3*6 Screws; Assembling Right and Rear Sections

6.1.2 Use M3*6 socket head cap screws to fix the profile from the top.
(Note: There is no need to lock the screws in this step, lock the screws again in step
6.3.3.)
(Note: There is no need to lock the screws in this step, lock the screws again in step
6.3.3.)
6.1.3 Insert the right assembly to the rear assembly in the same way and
then also secure it with 3 M3X6 screws.
01 02
03 04
05 06
07 08
09 10
11 12
13 14
15 16
17 18
19 20
21 22
23 24
25 26
27 28
29 30
31 32
33 34