ACMER P2 - X-axis Assembly Installation; Securing X-axis with M4*8 Screws

6.2 You will need to prepare the following sections.
X-axis assembly x 1
M4*8 Screwx4
6.2.1 Secure the X-axis assembly to the gantry frame using four M4*8 screws
from each side.
01 02
03 04
05 06
07
08
09 10
11 12
13 14
15 16
17 18
19 20
21 22
23 24
25 26
27 28
29 30
31 32
33 34