ACMER P2 - Belt and Laser Module Installation; Installing Drive Belts; Adjusting Belt Tension

6.3 You will need to prepare the following sections.
Note: The left and right belt tightness needs to be consistent.
6.3.2 Use an Allen wrench to adjust the belt tightness.
Install the left and right belts.6.3.1
Belt x2 Laser Module x 1
1 2
3
4
01 02
03 04
05 06
07 08
09 10
11 12
13 14
15 16
17 18
19 20
21 22
23 24
25 26
27 28
29 30
31 32
33 34