Acorn 80 Installation Manual

12
ACORN 80 Installation Manual
SECTION 5
Rail Support Kit
In order to improve the stability of the Acorn 80 rail, a top bracket has been designed to secure the rail to the
wall. The inclusion of this part will be determined by the Drawing Office as part of the feasibility, but can also be
purchased when circumstances of the end user changes.
The part should be used in configurations where :
1 An angled cut is requested at the top of the rail.
2 The last leg at the top of the rail is over 40cm from the end of the rail.
The wall support bracket can be ordered as a spare part on part number SP1241648.
RAIL SUPPORT KIT
5.1 Parts Included In The Rail Support Kit
1x Wall support bracket
2x M12 Nyloc nuts
2x M12 Slim nuts
3x M12 washers
1x M12 studding

Acorn 80 Specifications

General

Safety Features	seatbelt
Speed	0.15 m/s
Seat Type	Padded
Footrest	Flip-up
Foldable	Yes
Color Options	Beige
Power Supply	Battery powered (2 x 12V sealed lead acid batteries)