3.2 Simultaneous acquisition and readout (CST option)
36 Acqiris SA240P User's Manual
Configuration
The interfaces/methods/properties (functions/attributes) listed below are provided by the Acqiris
MD3 driver.
The CST acquisition mode may be enabled by setting the Streaming Mode to Triggered.
To stop the streaming mode, an Abort should be performed.
The different streams are implemented as instances of stream Repeated capabilities.
There are several types of stream Repeated capabilities. Detailed help may be found in
AqMD3 IVI Driver Help. Please refer to AqMD3.chm (IVI-C) or Acqiris.AqMD3.Fx40.chm
(IVI.NET).
To Next Page
Loading...