Acqiris SA240P - Page 47

4.1 Baseline stabilization and digital offset
Acqiris SA240P User's Manual 47
Attributes
Attribute Description
AQMD3_ATTR_CHANNEL_
BASELINE_CORRECTION_
MODE
Defines the mode used during baseline correction accumulation.
AQMD3_ATTR_CHANNEL_
BASELINE_CORRECTION_
DIGITAL_OFFSET
Applies a digital offset after the baseline correction.
AQMD3_ATTR_CHANNEL_
BASELINE_CORRECTION_
PULSE_POLARITY
Defines pulse polarity for baseline correction.
AQMD3_ATTR_CHANNEL_
BASELINE_CORRECTION_
PULSE_THRESHOLD
Baseline pulse detection threshold, as signed left-aligned 16-bit ADC code.
The threshold is applied to the stabilized signal (before DigitalOffset addi-
tion), i.e. relative to 0.
IVI.NET
Interface Method / Property name Description
IAqMD3ChannelBaselineCorrection
Configure
Configures the baseline stabilization
properties.
DigitalOffset
Applies a digital offset after the
baseline correction. DigitalOffset is a
signed left-aligned 16-bit ADC code.
Mode
Defines the mode used during
baseline correction accumulation.
PulsePolarity
Defines pulse polarity for baseline
correction.
PulseThreshold
Baseline pulse detection threshold,
as signed left-aligned 16-bit ADC
code. The threshold is applied to the
stabilized signal (before DigitalOffset
addition), i.e. relative to 0.