AR-B1579 User's Guide
5-5
Wait for ‘F1’ If Error
AMIBIOS POST error messages are followed by:
Press <F1> to continue
If this option is set to Disabled, the AMIBIOS does not wait for you to press the <F1> key after an error message.
Hit ‘DEL’ Message Display
Set this option to Disabled to prevent the message as follows:
Hit ‘DEL’ if you want to run setup
It will prevent the message from appearing on the first BIOS screen when the computer boots.
L1 Cache
This option specifies the caching algorithm used for L1 internal cache memory. The settings are:
Setting Description
Disabled
Neither L1 internal cache memory on the CPU or L2
secondary cache memory is enabled.
WriteBack
Use the write-back caching algorithm.
WriteThru
Use the write-through caching algorithm.
Table 5-1 Internal Cache Setting
L2 Cache
This option specifies the caching algorithm used for L2 secondary (external) cache memory. The settings are:
Setting Description
Disabled Neither L1 internal cache memory on the CPU or L2
secondary cache memory is enabled.
WriteBack Use the write-back caching algorithm.
WriteThru Use the write-through caching algorithm.
Table 5-2 External Cache Setting
System BIOS Cacheable
When this option is set to Enabled, the contents of the F0000h system memory segment can be read from or
written to L2 secondary cache memory. The contents of the F0000h memory segment are always copied from the
BIOS ROM to system RAM for faster execution.
The settings are Enabled or Disabled. The <Optimal default settings> is Enabled. The <Fail-Safe default setting>
is Disabled.
To Next Page
Loading...
