ASCON Service Guide Book
11
5. Timer Setting
Press set button to activate the timer setting (from 1 hour to 15 hour) of the air conditioning
unit. It will be in “On” or “Off” condition after the set time depending to the current condition
(either from “On” to Off” or vise versa)
To cancel the timer setting, press the button continuously until the timer display goes off.
6. Operation Modes
•
Press the “mode” button for select the type of operating mode.
•
Cooling only unit:
Cool
→
Dry
→
Fan.
•
Heatpump unit:
Auto
→
Cool
→
Dry
→
Fan
→
Heat
7. Fan Speed and Ventilation Mode Selection
•
Press the button until the desired fan speed is achieved.
8. Signal Transmission Indication
•
Blink to confirm the last setting has been send to the unit.
To Next Page
Loading...
Need help?
General
