ASCON Service Guide Book
24
5.6 SLM3
Operation Guide
1. “ON/OFF” Switch
•
Press to start the air conditioner unit.
•
Press again to stop the unit.
2. Temperature Setting
•
Set the desired room temperature.
•
Press button to increase or decrease the set temperature.
•
Setting range are between 16°C to 30°C (60°F to 80°F).
3. Operation Modes
•
Press the “mode” button for select the type of operating mode.
- Cooling Only:
COOL, DRY, FAN
- Heat Pump:
AUTO, COOL, DRY, HEAT, FAN
(AUTO mode is represented by both COOL and HEAT LED light on)
4. Fan Speed Selection
•
Press the button until the desired fan speed is achieved.
5. Timer
•
Press the set button to select the switch timer of the air conditioner unit (the setting range is
between1 to 10 hours).
To Next Page
Loading...
Need help?
General
