ASCON Service Guide Book
10
5.0 Handset Operating Guide
5.1 G6
Outlook
Operation Guide
1. “ON/OFF” Switch
•
Press to start the air conditioner unit.
•
Press again to stop the unit.
2. Temperature Setting
•
Set the desire room temperature.
•
Press button to increase or decrease the set temperature. Setting range are between 16°C to
30°C setting (60°F to 80°F) (Optional setting from 20°C to 30°C).
•
Press
▲
or
▼
button simultaneously will toggle the temperature setting between °C and °F.
3. Automatic Air Swing
•
Press the button to activate the automatic air swing function. The swing angle ranging from
horizontal to 25° to bottom.
4. “SLEEP” MODE
•
Press the button to activate sleep mode. This mode can only be activated while in cooling or
heating mode operation. If it is activated in “COOL” mode, the set temperature will be
increase 0.5°C after 30 minutes, 1°C after 1 hour and 2°C after 2 hours. Whereas in “HEAT”
mode, the set temperature will decrease by 1°C after 30mins, 2°C after 1 hour and 3°C after 2
hours.
•
This function is available under COOL, HEAT & AUTO mode.
To Next Page
Loading...
Need help?
General
