ASCON Service Guide Book
14
5.3 G12
Outlook
Operation Guide
1. “ON/OFF” Button
•
Press once to start the air conditioner unit.
•
Press again to stop the unit.
2. Temperature Setting
•
To set the desired room temperature, press
▲
the button to increase or
▼
button to decrease
then set temperature.
•
The temperature setting range is from 16°C to 30°C.
•
Press both buttons simultaneously to toggle and from
▲
°C to
▼
°F setting.
3. Operation Mode
•
Press the MODE button to select the type of operating mode.
•
For cooling only unit, the available modes are: COOL ( ), DRY ( ) and FAN ( ).
•
For heat pump unit, the available modes are: AUTO, COOL ( ), DRY ( ), FAN ( ) and
HEAT ( ).
To Next Page
Loading...
Need help?
General
