ASCON Service Guide Book
25
6. “SLEEP” Mode
•
Press button to activate the sleep function. This function can only be activated under “cool” or
heating mode operation. When it is activated under “cool” mode operation, the set
temperature will increase 0.5°C after 30 minutes, 1°C after 1 hour and 2°C after 2 hours. If it
is activated under “HEAT” mode operation, the set temperature will be decreased 0.5°C after
30 minutes, 1°C after 1 hour and 2°C after 2 hours.
7. Air Swing
•
Press button to activate the automatic air swing function.
8. Sensor
•
Infra red sensor to receive signals from wireless controller.
9. LED Display
•
To display the set temperature (in °C) and timer delay setting (in hours).
10. Transmission Source
•
To transmit signals to the air conditioner.
To Next Page
Loading...
Need help?
General
