ACT ACTPRO 3000 ACCESS CONTROL UNITS - OPERATOR MENU; User Set-up

ACTpro 3000 Operating Instructions Firmware Version 1.24
2
Operator Menu
User Setup Enable Allow a user or range of users to open the door
Disable Prevent a user or range of users from opening the door
Assign Names Enter a name for each user
Assign Groups Assign users to groups
Assign Options Specify options for each user
Assign PINs Set the individual PIN for each user
Learn Cards Learn randomly coded cards (e.g. Bank Cards).
Batch Cards Assign a batch of cards to a range of users.
One-To-One Assign a card to a user.
Card Validity Set a validity period for a user.
Group Setup Enable Allow users in specified groups to open the door.
Disable Prevent users in specified groups from opening the door.
Assign Names Enter a name for each group.
Access Rights Specify what access rights apply to each group.
Assign Options Specify output and PIN options for each group.
Assign PINs Set the PIN for each Group.
Timed Sets the Period for Timed Antipassback operation for
Antipassback each group.
System Log Display Log Show the system log on the display
Print Log Print the system log on an attached serial printer
Filter Log Prevent events entering the system log
Control Door Lock Door Lock door - prevent all cards from opening it.
Unlock Door Unlock door - relay is activated so cards are not required.
Normalise Door Set a door back to normal operation
Pass Door Momentarily open a door for the programmed time
AUX output on Switches the auxiliary output on
AUX output off Switches the auxiliary output off
User Tracking Log in Log a user into the tracking area
Log out Log a user out of the tracking area
Clear All Remove all users from the tracking area
Set Date/Time Date/Time Set the current date and time for the system.
Daylight Saving Set the difference between GMT and local time.
Time Zones Specify the time periods and days which apply to a given timezone.
Set Holidays Specify which days within the next year are holidays.
Issue Number Set the current system issue level (if issue checking option enabled).
Change PIN Change the PIN used to access the operator menu.
Exit from the menu is automatic if no keys are pressed for a period of time.