Need help?Do you have a question about the ACT ACT1000 and is the answer not in the manual?
General| Model | ACT1000 |
|---|---|
| Type | IP Access Controller |
| Power Supply | 12V DC |
| Operating Voltage | 12V DC |
| Access Control Method | PIN, Card |
| Operating Temperature | -10°C to 50°C |
| Connectivity | Ethernet |
| Communication Interface | Ethernet |
Manage user accounts, enable/disable, assign names, groups, PINs, and batch cards.
Configure groups for access control, assign names, rights, and PINs.
View and print system logs, filter events.
Lock, unlock, normalize, or pass doors; control auxiliary outputs.
Log users in/out of tracking areas, clear all tracking data.
Set the system's current date and time.
Define time periods and days for access control.
Specify days within the next year that are holidays.
Set system issue level for card validation.
Change the operator PIN for menu access.
Configure operation, display, PIN length, fire doors, user tracking, and outputs.
Configure door operation, alarms, timers, and timed actions.
Set network address, connection type, and speed.
Configure site codes and card formats.
Restore controller to factory default settings.
Various configuration and installation diagrams for ACT units.
Keys used for navigating menus: Quit, Next item, Select.
System for entering text, names, and numbers using keypad digits.
Mapping of keypad digits to characters for text entry.
Allows users to enable/disable, assign names, groups, PINs, learn cards, and batch cards.
Allows users to enable/disable groups, assign names, access rights, and PINs.
Allows viewing, printing, and filtering of system events.
Control door states (lock, unlock, pass) and auxiliary outputs.
Log user activity, track presence, and manage user limits.
Set the current date and time on the controller.
Specify time periods and days for access control.
Define holidays that affect access control timing.
Set system issue level for card validation.
Change the operator PIN for menu access.
Allows enabling users or ranges of users for access.
Allows disabling users or ranges of users from access.
Assigns a 16-character name to each user for identification.
Assigns users to specific groups for access management.
Assigns individual PINs to users for authentication.
Allows learning randomly coded cards for user access.
Assigns a specific known card to a specific user.
Sets a validity period for user access.
Disables users or tokens belonging to a specific group.
Assigns a 16-character name to each group.
Specifies timezone and door combinations for group access.
Applies additional options to a group.
View historical events on the LCD display.
Request a printout of the entire system log.
De-energizes the door relay to lock the door.
Energizes the door relay to unlock the door.
Returns the door relay to its normal state.
Energizes the door relay for a programmed period.
Energizes the auxiliary output relay for external equipment.
De-energizes the auxiliary output relay.
Manually enters a user into the tracking area.
Manually removes a user from the tracking area.
Removes all users from the tracking area.
Configures controller operation options like PIN Only, Learn, Keypad, etc.
Configures display options like Backlight, Beep, Show Status, etc.
Sets the length of user and group PIN codes.
Defines doors for fire override configuration.
Configures user tracking parameters and limits.
Defines output functions for doors 1 and 2.
Configures door operation parameters like Push Button, Lock Saver, etc.
Enables or disables alarm events for doors.
Programs time delays for relay, AUX output, OP2, OP3, and door ajar alarm.
Configures reporting of events like Door Forced, Door Ajar, etc.
Sets up actions that occur at requested times based on timezones.
Assigns a name to a door.
Sets the network address of the controller.
Configures direct connection to a PC.
Selects or deselects options relating to default controller operation.
Configures display options for the controller keypad.
Sets the length of PIN codes for users and groups.
Auto-resets user tracking data or allows manual reset.
Configures user limits for tracking areas and outputs.
Defines output functions for Door 1.
Defines output functions for Door 2.
Selects or deselects options relating to default door operation.
Enables or disables various alarm events for the controller.
Sets the network address of the controller.
Configures direct connection to a PC.
Enables an additional door station or ACT1000 unit.
Disables an enabled door.
To Next Page
