ActionTec SBWD100B - Ultra-Low Delay

25
ScreenBeam Pro - Business Edition
Extend
The Extend mode creates a single, extended “screen” between the source device
and the HDTV. When in Extend mode, dragging windows to the right side of the
device’s screen displays those windows on the HDTV, while dragging windows to
the left of the HDTV screen displays them back on the device’s screen. This mode
allows users to display selected content on the HDTV, while all other windows
remain on the device’s screen. When this mode is first selected, the HDTV displays
only the Windows desktop.
Second Screen Only
The Second Screen Only mode causes the HDTV to be the only display for the
device. All content will be displayed on the HDTV; the source device’s screen will
be blank.
Ultra-Low Delay
ScreenBeam Pro also supports Ultra-Low Delay mode, which helps reduce end-to-
end wireless display latency. Real-time applications, such as games, can run without
noticeable delay when Ultra-Low Delay mode is enabled on supported devices.
Intel WiDi
You can activate Ultra-Low Delay on a device running Intel WiDi 3.5 or higher.
Follow the steps below to switch to ultra-low delay mode:
1. Launch the Intel WiDi application, connect to ScreenBeam Pro, then
click Settings.