ActionTec SBWD100B User Guide

43
ScreenBeam Pro - Business Edition
2. The Network Settings window appears. Scroll down to the Ethernet Interface
Setting section.
3. Enter a IP address in the appropriate text boxes.
4. Enter a subnet mask address in the appropriate text boxes.
5. Click Apply.
6. In the Message from webpage window that appears, click OK.
The Receiver reboots. When complete, the new settings are enabled. Now, when a
USB-to-Ethernet adapter is connected to the Receiver, this IP address is displayed
in the lower part of the Ready to connect screen. Users can use this IP address to
access the local management server.

ActionTec SBWD100B Specifications

General

Brand	ActionTec
Model	SBWD100B
Category	Receiver
Language	English