WiDi Software Version Support
Make sure the device supports Intel Wireless Display (WiDi) soware version 3.5 or higher. To
nd out which version of Intel WiDi the device is running, launch the Intel WiDi application,
click Help, then navigate to the About Intel® WiDi section. To obtain the latest Intel WiDi
soware and drivers, go to:
http://www.intel.com/go/wirelessdisplayupdate
or click Check Intel® WiDi website for updates.
Connecting via Miracast
is section explains how to connect a Miracast-enabled Android device, such as a smartphone,
a tablet, or a game console, to the Receiver. For the best performance, the Miracast device should
be running the latest soware.
1.
On a Miracast-enabled Android device, locate and open the Wireless Display application
(check for the application under Settings).
Note: e name of the Wireless Display Application depends on the device type and
model. Refer to the device’s user manual for more details.
2.
e Wireless Display Application scans for available devices. Select the Receiver from the
device list. A PIN code may need to be entered, and will be displayed on the HDTV screen.
3.
Wait for the device to pair with the Receiver. When it does, the device’s screen will be
displayed on the HDTV.
Tips for Optimal Performance
For optimal performance, try the following:
•
Keep the Receiver within line-of-sight of the source device. Doing this will help ensure the
Receiver receives the best possible signal.
•
e Receiver's optimal wireless range is within 30 feet from the source device. However,
actual range and eectiveness depends on many factors, including other sources of
interference and the building materials used in the surrounding structure.
•
Avoid placing the Receiver near wireless interference sources, such as electric fans, items
with motors, microwave ovens, or cordless phones.
To Next Page
Loading...
