Installing the Receiver
is chapter explains how to connect the Receiver to an HDTV. Make sure all the contents from
the Receiver’s package are available before starting.
Connecting to an HDTV
To connect the Receiver to an HDTV:
1.
Get the Receiver, USB Y-cable, AC power adapter, and HDMI extension cable from the
Receiver’s package.
2.
Plug the small male connector of the USB Y-cable to the Receiver’s Power port.
3.
Plug the Receiver into an available HDMI port on the HDTV.
4.
Plug the large male connector of the USB Y-cable to the power adapter, and plug the power
adapter to a power outlet.
When complete, the hardware should be connected as shown in the gure below:
5.
Turn on the HDTV and set it to display the input from the HDMI port the Receiver is
plugged into.
To Next Page
Loading...
