ActionTec ScreenBeam Mini 2 SBWD60A - Page 25

•
Connect your device to a wireless network that is using a cleaner wireless channel or
change the wireless channel on the current wireless network, and then connect the
device to the Receiver.
•
Turn o the Wi-Fi devices that are not in use currently.
•
Avoid placing the Receiver near wireless interference sources, such as electric fans, items
with motors, microwave ovens, cordless phones.
What wireless signal range can I expect with the Receiver?
e Receiver is designed to be used in the same room with the source device. For best
performance, the source device should be placed within 30 feet to the Receiver.
Do I need an existing wireless network to use the Receiver?
No. e Receiver connects directly with the Intel WiDi or Miracast-enabled device, and no
wireless network is needed. However, the source device needs to be connected to an Internet
router or data network to view online content.
How can I upgrade the Receiver’s rmware?
You can upgrade the Receiver’s rmware wirelessly by using ScreenBeam Conguration
Utility, which is available on Actiontec’s website at:"
http://www.actiontec.com/sbupdate
•
For Windows 8.1 devices, you can also install ScreenBeam Conguration Utility
(Metro) available on Microso Store (tip: search for “ScreenBeam”).
•
For Android devices, you can also install ScreenBeam Conguration Utility (Android)
available on Google Play Store (tip: search for “ScreenBeam”).
How do I congure the Receiver's general settings, such as changing the
language, renaming the Receiver, enabling/disable screensaver, or idling time
for screensaver?
You can congure the receiver wirelessly by using ScreenBeam Conguration Utility, which
is available on Actiontec’s website at:"
http://www.actiontec.com/sbupdate
•
For Windows 8.1 devices, you can also install ScreenBeam Conguration Utility
(Metro) available on Microso Store (tip: search for “ScreenBeam”).
•
For Android devices, you can also install ScreenBeam Conguration Utility (Android)
available on Google Play Store (tip: search for “ScreenBeam”).
How can I adjust the display to t properly to my TV screen?
Connect your device to Receiver rst, and then adjust the screen size with one of the
following methods:
•
Go to the Intel WiDi application, and then select Settings > Picture and Sound > Adjust
Cropping. Follow the onscreen instructions to adjust the screen.
24