Active Era BS-06 - Measuring Units Selection; Taking Measurements; Baby Mode Operation

5 | English
These smart scales can measure in kilograms (kg), pounds (lb), and stone (st).
Select the desired measuring unit directly within the Active Era App.
Baby mode allows you to nd out the weight of your baby by weighing yourself on
the smart scales whilst holding your baby. To use baby mode:
1. Open the Active Era app and sign in.
2. Create a new user prole for your baby and ensure this new baby specic user
prole is selected.
3. Place the smart scales on a dry, solid, and at surface.
4. Press the menu button in the top right hand side of the screen and press Baby
Mode in the drop down menu.
5. Step onto the smart scales by yourself.
6. The smart scales will turn on and an analysis of your body’s weight will start
automatically.
7. Once a nal weight measurement has been obtained it will ash on the
display.
8. Immediately weigh yourself with your baby.
Prior to taking measurements ensure that you have downloaded the Active Era
app, created a user account, and paired the smart scales with your smartphone or
tablet.
1. Place the smart scales on a dry, solid, and at surface.
2. Open the Active Era app and sign in.
3. Remove shoes and socks and step barefoot onto the smart scales.
4. Stand still and ensure your feet are in full contact with the metal sensor plates.
5. The smart scales will turn on and an analysis of your body’s composition will
start automatically.
6. Once the analysis has completed your weight and other data points will show
both on the display of the smart scales and in the Active Era app.
Note, always remove shoes and socks prior to using the smart scales.
Note, to ensure accuracy of results, it is recommended to weigh yourself at
the same time of day as measurements may vary after exercise, dieting, or
dehydration.
MEASURING UNITS
BABY MODE
MEASUREMENTS