10
Assembly Instructions
5. Assembly Instructions (cont.)
5.4 Assembly (cont.)
10 11
Purge air by squeezing the trigger on the gun
until there is a steady stream of water.
Push ON/OFF button, switch is set in ON
position, machine is ready to operate.
Push the ON/OFF button one more time to set
switch in OFF position, machine is stopped.
CAUTION
Drain unit aer each use (for storage):
remove water connection, turn ON the
machine for a few seconds and press gun
trigger to drain remaining water in the pump.
Turn OFF immediately.
ON/OFF
button
PURGING
To Next Page
Loading...
Need help?
General
