Active VE52 User Manual

11
Operating Instructions
6. Operating Instructions
6.1 Working with Foam Blaster
Working with a detergent ensures quick soaking
of the dirt, and allows the high-pressure water
to penetrate and remove the dirt more
effectively. Always spray detergent on a dry
surface, do not pre-soak the area. Wetting the
surface first dilutes the detergent and reduces
its cleaning ability.
CAUTION
Damage may occur to painted surfaces if
chemicals are allowed to dry on them. Wash
and rinse a small section at a time.
Engage the safety lock on the spray gun.
1. Detach spray head by turning detergent
bottle 1/4 turn counter-clockwise.
2. Fill the bottle with the detergent.
Reattach the spray head on to the bottle
by turning 1/4 turn clockwise.
1. Attach the foam blaster onto
the spray gun.
2. Apply the detergent to dry work surface
from bottom to top.
3. Allow detergent to remain on the surface
for a short time before rinsing. Do not
allow detergent to dry on the surface.
4. When you finish working with detergent,
fill with clean water in bottle and spray
water for one minute in ON position to
rinse the Foam Blaster and remove any
soap residues that may clog it.
1
2
2
1
2

Active VE52 Specifications

General

Brand	Active
Model	VE52
Category	Pressure Washer
Language	English