Quick Start Guide | 13English
573101 REV A | 02.2015
Bosch Automotive Service Solutions Inc.
Function Menu Description
Print Data Main, Diagnostic,
Datastream,
Diagnostic Codes,
Special Tests
Prints diagnostic information stored
in the Scan Tool. (Refer to Users
Manual)
Print Header System Setup Allows the user to turn off the Scan
Tool printing the currently-selected
vehicle prior to the retrieved vehicle
data when selecting items from the
Print Data menu.
Program
Mode
System Setup Used for updating the Scan Tool.
Quick Test System Setup Allows the user to turn off the Scan
Tool performing Read Codes and
I/M Monitors after vehicle selection
when the Scan Tool is connected to
the vehicle.
Read Codes Diagnostic Codes Reads DTCs from vehicle’s computers.
Record Data Datastream Records vehicle PIDs while vehicle
is parked or being driven. This
function is for diagnosing intermit-
tent driveability problems.
Recording System Setup Plays back a recording that allows
viewing of previously-recorded PIDs.
Review Data Main, Diagnostic,
Datastream,
Diagnostic Codes,
Special Tests
Allows review of data stored in Scan
Tool.
To Next Page
Loading...
