Acuity Brands nLight UNITOUCH - Page 35

Acuity Brands | One Lithonia Way Conyers, GA 30012 | Phone: 800.535.2465 | www.acuitycontrols.com | © 2019 Acuity Brands Lighting, Inc. | All rights reserved. | Rev. 11/14/2019
Output Devices
From the Output Devices screen, administrators have
access to going into detail views of devices, while also
triggering the curtsy of all the devices in the lighting
control zone.
1. Curtsy/Identify button – Signals the device to
enter curtsy/identify mode.
2. Device Detail button – Transitions the to the
device detail screen.
Device Detail
From the Device Detail screen, users can configure an
individual device to the extent below:
1. Name Field - Used to modify the name of the
device.
o Changes to this channel shall be
reflected on SensorView.
2. Curtsy/Identify button – Signals the device to
enter curtsy/identify mode.
3. Tracking Channels – Allows selection of
channels to track.
o If device is multiple, this will only do
configuration of the first pole.
SensorView must be used to
configure other poles.