58
uuMapuColor
Illumination Priority Operation
Dash illumination
adjustment buttons
(see your Owner’s
Manual for location)
3 When headlights are turned on, and you wish to
have the Day display mode, adjust the
illumination to the full brightness setting (beeps).
Remember: Adjust the dash brightness back to
mid-range to allow auto switching by sensing if
the headlights are on or off.
Headlights (Auto/
On/Off)
4 When turned on, the display changes to Night
display mode. The previous three controls listed
above can “cancel” this function.
Remember: Use the (Display Mode) button
to adjust the brightness of the display.
Screen color choice N/A The user can select the color of the screen that
will be displayed for the Day and Night display
modes described above.
19 ACURA ILX NAVI-31TX68600.book 58 ページ 2018年8月8日 水曜日 午後2時21分