Acura MDX 2003 - Page 351

Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
Your car uses halogen fog light
bulbs. See page for information
on replacing a halogen bulb.
Remove the electrical connector
fromthebulbbysqueezingthe
connector to unlock the tab, then
slide the connector off the bulb.
Push the electrical connector onto
the new bulb.
Use a wrench to loosen the light
assembly’s mounting bolt.
Remove the light assembly from
the bumper.
1.
2.
3.
4.
5.
341
CONTINUED
ReplacingaFogLightBulb
Lights
Maintenance
343
BOLT
CONNECTOR
０２／０７／３０ ２２：１７：２７ ３１Ｓ３Ｖ６２０ ０３４８