CONTINUED
Before mounting the spare tire,
wipeanydirtoffthemounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully,itmaybehotfrom
driving.
Put on the spare tire. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel wrench
until the wheel is firmly against
the hub. Do not try to tighten
them fully.
Lower the vehicle to the ground
and remove the jack.
15.
16. 17.
Changing a Flat Tire
Taking Care of the Unexpected
365
BRAKE HUB
０２／０７／３０ ２２：２０：５２ ３１Ｓ３Ｖ６２０ ０３７０
To Next Page
Loading...
