The left or right turn signal light
blinks when you signal a lane change
or turn. If the light does not blink or
blinks rapidly, it usually means one
of the turn signal bulbs is burned out
(see page ). Replace the bulb as
soon as possible, since other drivers
cannot see that you are signaling.
WhenyouturnontheHazard
Warning switch, both turn signal
lights blink. All turn signals on the
outside of the vehicle should flash.
The appropriate light comes on in
this display if the tailgate or any door
is not closed tightly.
All the lights in the monitor display
come on for a few seconds when you
turn the ignition switch to ON (II).
If a brake light does not work, the
indicator comes on
when you push the brake pedal with
the ignition switch ON (II).
A burned out brake light is a hazard
when drivers behind you cannot tell
you are braking. Have your brake
lights repaired right away.
342
Indicator Lights
Instruments and Controls
Turn Signal and
Hazard Warning
Indicators
Door and Tailgate Open MonitorBrake Lamp Indicator
70
BRAKE LAMP
０２／０７／３１ １１：２４：５２ ３１Ｓ３Ｖ６２０ ００７５
To Next Page
Loading...
