13
Problem Possible Solution
• Navigate to “192.168.4.1” in your web browser.
Conrm that your Station ID and Station Key are
entered correctly.
Can’t load Wi-Fi setup
page
• Verify your computer or mobile device is still
connected to the display’s Wi-Fi. Reconnect if
necessary.
• Your internet router and display must be within range
of each other. Relocate your display closer to your router.
• Ensure the network name (SSID) and password you've
entered are correct. NOTE: Both network name and
password are case sensitive.
• Reset the display by pressing and holding the
RESET button for 10 seconds, located in the battery
compartment of the display. Date and time will need
to be entered after a reset.
• Make sure DCHP is enabled on your router. Most
routers have DHCP enabled by default.
• Ensure your router is broadcasting a 2.4 GHz
network. The weather station display is equipped with
a Wi-Fi module that only supports 2.4 GHz wireless
networks.
Display not connecting
to Wi-Fi
Data not uploading to
Weather Underground
TM
To Next Page
Loading...
