To Next PageTo Next PageHow to fix inaccurate temperature or humidity on my AcuRite Weather Station?
To correct inaccurate temperature or humidity readings on your AcuRite Weather Station, ensure that both the display unit and 5-in-1 sensor are placed away from any heat or moisture sources. Also, make sure the 5-in-1 sensor is mounted at least 5 feet off the ground. You can also calibrate the indoor and outdoor temperature and humidity.
What to do if AcuRite Weather Station has no rainfall reading?
If your AcuRite Weather Station isn't registering rainfall, first check that the rain gauge stabilizer (plastic tab) has been removed from the bottom of the sensor. Also, clear any debris, such as leaves, from the rain collector funnel and debris screen. Calibrate the rain gauge if necessary. Verify the sensor’s internal tipping lever is moving freely by dripping a little water through the rain collector; you should hear the lever tipping. If not, you may need to clean inside the sensor.
Why are wind readings inaccurate on my AcuRite Weather Station?
Inaccurate wind readings on your AcuRite Weather Station can be due to several factors. Consider what the wind reading is being compared to; professional weather stations are typically mounted at 30 ft high or more, so compare data using a sensor positioned at the same mounting height. Check the sensor's location, ensuring it’s mounted a minimum of 5 ft in the air with no obstructions. Also, ensure the wind cups are spinning freely; if they hesitate, try lubricating them with graphite powder or spray lubricant.
Why AcuRite 01528 outdoor temperature is flashing?
The outdoor temperature on your AcuRite Weather Station might be flashing due to wireless interference. Ensure the A-B-C switch in the battery compartments of both the display unit and sensor are switched to the same letter. Sometimes, changing to a different channel can also resolve this issue.
What to do if my AcuRite 01528 Weather Station display screen is not working?
First, check that the batteries are installed correctly in your AcuRite Weather Station and replace them if needed. If that doesn't work, reset the display by pressing and holding the “CLEAR RECORD /RESET” button on the back of the display unit. Note that you will need to enter the date and time after a reset.
Why is my AcuRite Weather Station forecast inaccurate?
The forecast icon on your AcuRite Weather Station predicts conditions for the next 12 to 24 hours, not current conditions. Ensure that the Learning Mode icon has disappeared from the display unit, as Learning Mode must complete before the forecast and pressure readings become accurate. Allow the unit to run continuously for 33 days for full calibration. Removing batteries or resetting the display unit will restart Learning Mode. The forecast should be fairly accurate after 14 days, but Learning Mode calibrates for a total of 33 days.
General| Display Type | LCD |
|---|---|
| Temperature Range (Indoor) | 32°F to 122°F (0°C to 50°C) |
| Temperature Range (Outdoor) | -40°F to 158°F (-40°C to 70°C) |
| Humidity Range (Indoor) | 1% to 99% |
| Humidity Range (Outdoor) | 1% to 99% |
| Wireless Range | 330 ft (100 m) |
| Power Source (Display) | 3 x AA batteries (not included) |
| Power Source (Sensor) | 2 x AA batteries (not included) |
| Wind Speed | 0 to 99 mph (0 to 159 km/h) |
| Rainfall | 0 to 99.99 inches |
Lists all items included in the weather center package, including display unit, sensor, and accessories.
Details the components and functions of the integrated 5-in-1 wireless sensor.
Describes the various readouts and indicators displayed on the main weather station display unit.
Instructions for setting up the 5-in-1 sensor, including A-B-C switch, batteries, and rain gauge stabilizer.
Instructions for setting up the display unit, including A-B-C switch, power adapter, and backup batteries.
Guidelines for placing the display unit in a suitable environment for accurate readings.
Instructions for positioning the 5-in-1 sensor outdoors for best performance and data accuracy.
Key considerations for maximizing wireless range and preventing interference for sensor communication.
Explanation of the self-calibrating forecasting feature and its 14-day learning period.
Guide to understanding the various weather forecast icons displayed on the unit.
How to view different weather data categories like wind chill, dew point, and heat index.
Understanding how barometric pressure changes and their impact on weather trends.
Accessing and clearing daily or all-time high and low temperature and humidity records.
How to clean and maintain the display unit, avoiding harsh cleaners and moisture.
Guidelines for cleaning the sensor, rain collector, and wind vane to ensure optimal performance.
Methods to prevent insects from obstructing the 5-in-1 sensor's operation.
Information on how freezing conditions affect the sensor and rain measurement.
Procedure for removing and cleaning the debris filter from the rain collector funnel.
How to remove foreign matter from the wind measuring components for smooth movement.
Instructions for calibrating temperature, humidity, and barometric pressure readings on the display unit.
Technical details including temperature, humidity, wind speed, and wireless range limits.
Regulatory information regarding FCC rules and user responsibilities for device operation.
Information on the product warranty, including coverage, limitations, and claim procedures.
