To Next PageTo Next Page
Need help?Do you have a question about the Aczet CZ 602 and is the answer not in the manual?
General| Capacity | 600 g |
|---|---|
| Readability | 0.01 g |
| Repeatability | 0.01 g |
| Linearity | ±0.02 g |
| Calibration | External |
| Operating Temperature | 10°C to 40°C |
| Weighing Capacity | 600 g |
| Power Source | AC Adapter |
| Auto-off | Yes |
| Tare Function | Yes |
| Response Time | 3 seconds |
| Units | g, oz |
Emphasizes the importance of carefully reading the operation manual before setup and commissioning.
Explanation of why and when calibration is necessary due to gravity variations.
Details on how to perform the calibration process using recommended adjustment weights.
Step-by-step guide for calibrating non-NTEP models, including display and operation steps.
Step-by-step guide for calibrating NTEP models, including specific display and operation sequences.
Information on improving linearity deviation by performing the linearization process.
Procedure for linearization specific to non-NTEP models with low resolution.
Procedure for linearization applicable to both non-NTEP (low resolution) and NTEP models.
Instructions for performing basic weighing operations, covering differences between non-NTEP and NTEP models.
Detailed steps for taring the balance, applicable to non-NTEP models.
Detailed steps for taring the balance, applicable to NTEP models.
Instructions for parts counting, covering the process for non-NTEP models.
Instructions for parts counting, covering the process for NTEP models.
Steps for performing percent weighing, applicable to non-NTEP models.
Steps for performing percent weighing, applicable to NTEP models.
Troubleshooting for 'Incorrect adjusting weight' error.
Troubleshooting for 'Zero range exceeded' error.
