To Next PageTo Next Page
Need help?Do you have a question about the Aczet CZ 1202 and is the answer not in the manual?
General| Capacity | 1200 g |
|---|---|
| Readability | 0.01 g |
| Pan Size | 120 mm |
| Calibration | External |
| Power Supply | AC Adapter |
| Auto Power Off | Yes |
| Overload Protection | Yes |
| Units | g, oz, ct, dwt, ozt, gn |
Emphasizes thoroughly reading the operation manual before use.
States that only trained personnel are permitted to operate the appliance.
Guidelines for selecting an optimal installation location for accurate results.
How to position the balance and remove the transportation lock.
Steps for initial setup and reaching operating temperature.
Explains the necessity and process of calibration.
General steps involved in the calibration procedure.
Step-by-step guide for calibrating non-NTEP models.
Step-by-step guide for calibrating NTEP models.
Explains linearity and how to improve it.
Procedure for linearizing non-NTEP low-resolution models.
Procedure for linearizing both non-NTEP low-resolution and NTEP models.
Details the function of each key on the balance.
Explains the symbols and indicators on the balance display.
Instructions for performing basic weighing operations.
How to zero out the weight of a container.
Instructions for using the parts counting function.
How to sum multiple weights.
