Aczet CY 2202 User Manual

O p e r a t i n g M a n u a l
Analytical Balances | Carat Balances | Precision Balances | High Precision Industrial Balances
This document hosted by: www.oldwillknottscales.com

Aczet CY 2202 Specifications

General

Brand	Aczet
Model	CY 2202
Category	Scales
Language	English

Summary

1. Introduction

1.1 Warnings and Safety precautions

Covers safety warnings and precautions for balance operation and handling to prevent damage or injury.

2.1 Location

2.2 Warm Up

2.3 Keys of Balance

4. Simple Weighing

4.0.1 Simple weighing

Details the procedure for performing a basic weighing operation on the balance.

4.0.2 Tarring

Explains the process of taring the balance to measure the net weight of samples.

4.1 External Calibration (adjusting)

4.2 Internal Calibration

4.3 Calibration Test

4.4 Calibration Test with Actual Calibration

5. Overview of Menu

5.1 Operating Instruction

Provides step-by-step instructions for navigating and using the balance's menu system.

5.2.1 Special applications and functions

5.2.3 Adjusting the stability Filter

5.2.4 Selecting Calibration Option

5.2.5 Calibration Test

5.2.6 Auto Zero Tracking

5.2.13 A. Off - Setting automatic standby

5.2.14 Reset of the balance setting

6. Functions

6.1 Piece counting

Describes the procedure for counting pieces using a reference weight.

6.1.1 FREE (Reference settings)

6.1.3 Updating Settings

6.2 Percent Weighing (%)

6.2.1 FREE (Reference settings)

6.2.2 Differential Weighing

6.3 Custom Unit

6.4 Animal Weighing

6.4.1 Manual Animal Weighing

6.4.2 Auto Animal Weighing

6.5 Formulation

6.5.1 Manual Formulation

6.5.2 Auto Formulation

6.6 Check Weighing

Target and Tolerance Settings

Details how to set target, high, and low values for check weighing.

6.7 Totalization

6.7.1 Manual Totalization

6.7.2 Auto Totalization

6.8 Density Determination

6.9 Pipette Calibration

6.10 Statistics

Statistics procedure

7. Parameter Settings

AUTOCAL SETTINGS

Describes how to configure automatic calibration settings (time, temperature).

7.3 Auto Calibration

7.3.1 Auto CAL Time Settings

7.3.2 Auto CAL Temperature Settings

7.3.3 Power on Calibration

7.4 Windows Direct Communication

9. Data Interface

10. Error Codes

11. Care & Maintenance

13. Specifications

Analytical Balances

Lists technical specifications for Analytical Balance models.

Precision Balances

Lists technical specifications for Precision Balance models.

Top Loading Precision Balances

Lists technical specifications for Top Loading Precision Balance models.

High Capacity Precision Balances

Lists technical specifications for High Capacity Precision Balance models.

Carat Balances

Lists technical specifications for Carat Balance models.