To Next PageTo Next Page
Need help?Do you have a question about the Aczet CZ 6H and is the answer not in the manual?
General| Capacity | 6 kg |
|---|---|
| Operating Temperature | 10°C to 40°C |
| Calibration | External |
| Display | LCD |
| Interface | RS232 |
| Auto Calibration | No |
| Tare Function | Yes |
| Overload Protection | Yes |
| Units | g, kg, lb, oz |
| Power | AC Adapter |
| Power Supply | AC Adapter |
The smallest weight difference the scale can detect.
The maximum weight the scale can measure.
Consistency of measurements under the same conditions.
Power source requirements for the scale.
Communication ports for data output.
Guidelines for correct and intended use of the balance.
Prohibitions and warnings against misuse of the balance.
Important safety and operational precautions to follow.
Criteria for selecting an appropriate location for the scale.
Steps for removing the balance from packaging and setting it up.
How to connect the scale to the power supply.
Step-by-step guide for performing the balance calibration.
Performing a standard weighing operation.
How to subtract the weight of a container or previous load.
Using color signals (red, yellow, green) for weighing status.
Steps for navigating through the scale's menu options.
Details about the RS232 serial interface for data communication.
Technical specifications for the RS232 interface.
Instructions for safely cleaning the scale.
Information on authorized service and maintenance procedures.
