Aczet CZ Series User Manual

USA
Aczet Inc.
1637 STELTON ROAD, UNIT B5, Piscataway, NJ 08854 , USA
Direct :+ 1-732.777.0900 | Fax: + 1-732.777.0901 | Toll Free : 18009971440
Email: info.usa@aczet.com
UAE
Aczet Instruments LLC
P.O. Box 27137, Deira - Dubai, United Arab Emirates
Tel: +971 4 2255266/2258929 | Fax : +971 4 2354665 | Cell: +971 50 6593253
Email : info.uae@aczet.com
Thailand
Aczet (Thailand) Co. Ltd.
3A1, 3rdfloor, BIS Building, 119 Mahesak Road, Suriyawong,
Bangrak, Bangkok 10500, Thailand | Mob : (+66) 920456757 | Off : (+66) 26359620
Email : info.thailand@aczet.com
India
Aczet Pvt. Ltd.
E2, Plot No. 15, WICEL, Opp. Seepz Gate No. 1, MIDC, Andheri (E), Mumbai 400 093. India
Tel. : +91-22-4243 7700 | Fax : +91-22-4243 7800 | Toll Free : 1800 102 6054
E-mail : export@aczet.com | Web : www.aczet.com
Economical Precision
Balances
Operating Manual
CZ Series
This document hosted by: www.oldwillknottscales.com

Aczet CZ Series Specifications

General

Brand	Aczet
Model	CZ Series
Category	Scales
Language	English

Summary

Basic Safety Precautions

Operation Manual Instructions

Emphasizes reading the manual for setup and commissioning.

Unpacking, Setup, and Commissioning

Installation Site and Location

Advice on choosing a suitable location for accurate weighing.

Initial Commissioning

Steps for initial setup to achieve accurate results, including temperature stabilization.

Balance Calibration

Explains the importance and necessity of calibration due to gravity variations.

Calibration Process

Details on how to perform the calibration process using adjustment weights.

Non-NTEP Calibration Procedure

Step-by-step guide for calibration specific to non-NTEP models.

NTEP Calibration Procedure

Step-by-step guide for calibration specific to NTEP models.

Linearization Explained

Non-NTEP Linearization (Low Resolution)

Linearization for Non-NTEP and NTEP Models

Operation

Simple Weighing (Non-NTEP Models)

Step-by-step guide for simple weighing on non-NTEP models.

Simple Weighing (NTEP Models)

Step-by-step guide for simple weighing on NTEP models.

Taring (Non-NTEP Models)

Procedure for taring on non-NTEP models.

Taring (NTEP Models)

Procedure for taring on NTEP models.

Parts Counting (Non-NTEP Models)

Procedure for parts counting on non-NTEP models.

Parts Counting (NTEP Models)

Procedure for parts counting on NTEP models.

Adding (Non-NTEP Models)

Adding (NTEP Models)

Percent Weighings (Non-NTEP Models)

Procedure for percent weighing on non-NTEP models.

Percent Weighings (NTEP Models)

Procedure for percent weighing on NTEP models.

Menu Settings

Switching Weighing Units

Display Background Illumination

Multi-Tare Function (NTEP Models)

How to enable the multi-tare function for successive taring.

Error Messages

Incorrect Adjusting Weight Error

Zero Range Exceeded Error

Keyboard Input Error

Electronic Error

Transportation Lock Error

Instant Help and Troubleshooting

Common Faults and Causes

Common faults and their possible causes for troubleshooting.