EasyManua.ls Logo

Adano 33888 - BEFORE INSTALLATION; Planning the boundary wire layout

Adano 33888
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
93
GB
BEFORE INSTALLATION
It is recommended that you make a
sketch of your lawn with the obstacles
you want to protect. This provides a
good overview of the cabling work, as
well as the best location for the charg-
ing station.
Draw the boundary wire from the
charging station around the garden
and around any obstacles you want to
protect, such as flower beds, small trees,
etc.
The following section explains how
to install the robot lawnmower. Please
read this section carefully before plan-
ning and installing the boundary wire.
Also check how much boundary wire
(length) you expect to need. Enough
cable is included to go all the way
around lawns up to the capacity limit
(600 m2), but if you have a lot of flower
beds (islands) inside the lawn which the
cable has to go around, this can require
many metres of extra cable. It may
be necessary to purchase additional
boundary wire and extend it.
Charging station
Charging station

Table of Contents