Appendix C: Using the Adaptec RAID Controller Utility ● 100
Viewing the Event Log
The BIOS-based event log records all firmware events, such as
configuration changes, array creation, and boot activity.
Events are not stored indefinitely—the event log is cleared each time
you restart your computer; additionally, once the log is full, new events
overwrite old events.
To view the event log:
1 Start the Adaptec RAID Controller utility (see page 91).
2 Select the controller you want, press Enter.
3 When the Adaptec RAID Controller utility menu appears, press
Ctrl+P.
4 Select Controller Log Information, then press Enter.
The current event log opens.
To Next Page
Loading...
